Centrifugal compression stage performance with fluorocarbon refrigerants of different conditional isentropic exponents
Annotation
The article investigates fluorocarbon centrifugal compression stage performance with gases of different isentropic exponents and high Mach number as a refrigerant. The mixture of krypton-xenon concentrate with isentropic exponents (ky ) of 1.62; 1.49; 1.39; 1.2 and 1.12 was analyzed. Gas-dynamic characteristics for the last stage of refrigeration centrifugal compressor with axial-radial impeller are considered. The influence of isentropic exponent on the performance of centrifugal compression stage is analyzed. нахарактеристикиступенихолодильногоцентробежногокомпрессора. When ky increases the output density of gas decreases. Therefore, at the same output flow angle we have lesser compressor capacity for higher ky, i.e.higher contact angle. The influence of ky on compression stage performance is shown to be different and to depend on the peculiarities of matching the compressor flow stage elements. The results obtained might be expended to be valid for all refrigerants of similar ky and new ozone-safe refrigerants.
Keywords
Постоянный URL
Articles in current issue
- The influence of whey protein hydrolysate on organoleptic characteristics of oxygen cocktails basis
- Evaluation of varieties and hybrids of carrots on the suitability of fast-frozen products
- Influence of cooling on the quality of autumnal apples
- Phytochemical composotoin of chicory (Cichorium Intybus L.) products
- Biotechnology whole-smoked poultry products
- Starter cultures for obtaining curd whey with improved organoleptic properties
- Formula of functional jelly using local berries
- Heat transfer and pressure drop at refrigerant boiling in the plate coils
- Heat and hydrodynamic calculation of tube-in-tube heat-exchanger
- Determination of technological parameters of preheating of the polypropylene pipes for welding into the socket at low temperatures
- Heat load calculation for the modules of combined type freezing units
- New methods of forecasting flow regimes for boiling refrigerant in macro- and minichannels
- Rankine cycle working fluid for the use of regasification cold
- Basis approximating functions selection to maximize heat transfer coefficient of water-propylene glycol electrolyte coolant