![Journal of IAR](/images/mag-vest.jpg)
Thermodynamic efficiency of vegetable oil production line with pre extrusion treatment of raw materials
![Journal of IAR](/images/mag-vest.jpg)
Annotation
To evaluate theenergy efficiency of the technology under investigation manufacturing line for vegetable oil production with pre extrusion treatment of raw materials was analyzed, taking into account the use of different types of energy consumed in the processes based on the properties of the material; work executed on the system; and the total amount of all forms of external energy.Exergypowerwascalculatedforeachofthedefects, aswellasexternalandinternalloss.Calculated value for the coefficient of efficiency was 11.86 %, that is 5.7 % higher than that when a prototype technology was used, that proves theenergy efficiency of technology in question. The calculation results indicate increasing thermodynamic perfection degree of the system due to the combination of seed kernelgrinding, heat treatment and oil extraction in an extruder-oil separator.
Keywords
Постоянный URL
Articles in current issue
- Valorization of residual yoghurt whey by lactic acid production: An optimized process
- New modes of cherry compote sterilization in autoclaves with preheating of fruits in jars with saturated steam and two-stage cooling
- Unit for fine grinding of cottage cheese
- Production of high-quality dry modified collagen products by means of freeze-drying
- Analysis of risk assessment approaches in the transportation of refrigerated containers
- On the issue of compressible medium leakage in operating unit of single-rotor screw compressor (SSC) with circumferential shape of the tooth
- Thermal calculation of the water outlet device for the polypropylene pipes of cold water supply in winter conditions of the Far North
- The use of the capacitive sensors for the study of condensation processes in the short heat pipes of low-temperature range. Calculation of the sensors
- Features research of experimental and predesign chamber fruits and vegetables store with controlled atmosphere
- The influence of the design parameters for the flow part of short diffusers on their gas-dynamic efficiency
- The influence of absorbent concentration on cooling capacity of heat and mass transfer devices with a mobile nozzle
- Heat and mass transfer in the rooms with forced air supply
- Planetary temperature calculations under Milankovitch cycles
- The 23th General Annual Meeting of the International Academy of Refrigeration
- Results of the IAR’s work in 2015-2016 (Report of the IAR President at the 23th General Annual Meeting on 25 May 2016)