![Journal of IAR](/images/mag-vest.jpg)
Production of high-quality dry modified collagen products by means of freeze-drying
![Journal of IAR](/images/mag-vest.jpg)
Annotation
Production of collagen hydrolysate by biomodification of the frozen cattle lips and a way of its conservation by freeze drying are considered. Production process was carried out in the following way: the lips were preliminary washed out in the flowing tap water for20 min. to removeimpurities and slim;then flesh and fat lump was removed; water was drained for 15-20 min; and thethe raw materials were grindedusing grinder plate with 2-3 mmholes. The crushed samples were treated with the solutions of the Protease-B and Protease-C enzyme preparationsfor 0.5 – 1.5 h at the concentration of the preparation of from 0.02 to 0.06% to the mass of raw materials and mixed periodically (t = 17 ÷ 22 °C),with the ratio of raw materials to solution being 1:2.The filtrate from the product was separated by sieve. The raw materials processed in the above way were subjected to vacuum and freeze drying which was carried out at the SVP–0.36 testing bench in the mode of double-endedconductive and radiation power supply from electric heaters. Duration of freeze drying was 12 hours. Application of this type of drying has positive impact on properties of the raw materials, thus keeping its quality indicators.
Keywords
Постоянный URL
Articles in current issue
- Valorization of residual yoghurt whey by lactic acid production: An optimized process
- New modes of cherry compote sterilization in autoclaves with preheating of fruits in jars with saturated steam and two-stage cooling
- Unit for fine grinding of cottage cheese
- Production of high-quality dry modified collagen products by means of freeze-drying
- Analysis of risk assessment approaches in the transportation of refrigerated containers
- Thermodynamic efficiency of vegetable oil production line with pre extrusion treatment of raw materials
- On the issue of compressible medium leakage in operating unit of single-rotor screw compressor (SSC) with circumferential shape of the tooth
- Thermal calculation of the water outlet device for the polypropylene pipes of cold water supply in winter conditions of the Far North
- The use of the capacitive sensors for the study of condensation processes in the short heat pipes of low-temperature range. Calculation of the sensors
- Features research of experimental and predesign chamber fruits and vegetables store with controlled atmosphere
- The influence of the design parameters for the flow part of short diffusers on their gas-dynamic efficiency
- The influence of absorbent concentration on cooling capacity of heat and mass transfer devices with a mobile nozzle
- Heat and mass transfer in the rooms with forced air supply
- Planetary temperature calculations under Milankovitch cycles
- The 23th General Annual Meeting of the International Academy of Refrigeration
- Results of the IAR’s work in 2015-2016 (Report of the IAR President at the 23th General Annual Meeting on 25 May 2016)