![Journal of IAR](/images/mag-vest.jpg)
On the issue of compressible medium leakage in operating unit of single-rotor screw compressor (SSC) with circumferential shape of the tooth
![Journal of IAR](/images/mag-vest.jpg)
Annotation
In this paper the problem of the compressible medium leakage in the operating unit of the single-rotor screw compressor (EBA) with a peripheral shape of the tooth is considerd. Original system of differential equations for fluid dynamics in the relative motion of the rotating cylindrical coordinate system associated with the tooth clipper district profile is shown. It was found that, when dealing with the task in question, we should add the thermal and caloric equation of a continuous medium state to a system of differential equations of fluid dynamics. Dependences characterizing its viscosity and thermal conductivity as well as boundary and initial conditions should be also added. The simplification of the dependences obtained in the evaluation of the possible order for all their members taking into account the working medium flow character in the narrow gaps that occur in the engagement of screw-rotor compressor working elements is substantiated. The results of the continuity and movement equation calculation make it possible to describe the energy balance equation.
Keywords
Постоянный URL
Articles in current issue
- Valorization of residual yoghurt whey by lactic acid production: An optimized process
- New modes of cherry compote sterilization in autoclaves with preheating of fruits in jars with saturated steam and two-stage cooling
- Unit for fine grinding of cottage cheese
- Production of high-quality dry modified collagen products by means of freeze-drying
- Analysis of risk assessment approaches in the transportation of refrigerated containers
- Thermodynamic efficiency of vegetable oil production line with pre extrusion treatment of raw materials
- On the issue of compressible medium leakage in operating unit of single-rotor screw compressor (SSC) with circumferential shape of the tooth
- Thermal calculation of the water outlet device for the polypropylene pipes of cold water supply in winter conditions of the Far North
- The use of the capacitive sensors for the study of condensation processes in the short heat pipes of low-temperature range. Calculation of the sensors
- Features research of experimental and predesign chamber fruits and vegetables store with controlled atmosphere
- The influence of the design parameters for the flow part of short diffusers on their gas-dynamic efficiency
- The influence of absorbent concentration on cooling capacity of heat and mass transfer devices with a mobile nozzle
- Heat and mass transfer in the rooms with forced air supply
- Planetary temperature calculations under Milankovitch cycles
- The 23th General Annual Meeting of the International Academy of Refrigeration
- Results of the IAR’s work in 2015-2016 (Report of the IAR President at the 23th General Annual Meeting on 25 May 2016)